CSR
-
Important Results and Sustainability Performance in2023
-
Words from the Management
-
Sustainable Management
-
Sustainable Governance
-
Sustainability and Innovation
-
Environmental Sustainability
-
Common Prosperity and Growth
-
Download Report
-
互動專區
-
影音專區

Green Engineering Management
In response to the global focus on corporate carbon reduction efforts, Acter has gradually phased out old production processes and focused on developing high-value, low-power consumption and low pollution technologies, while enhancing green procurement practices and integrating them into engineering operations. With our dedication to developing various green technologies and establishing green engineering project management procedures, we aim to install high-value, low-power consumption, and low-pollution green factory facilities to minimize the impact of factory operations on land, air, water, and natural ecological systems. Considering that significant energy can be consumed throughout the entire life cycle of engineering construction projects, we start from the initial planning and design stages to enhance energy efficiency and minimize environmental impact. This approach not only reduces customers' operating costs but also facilitates the efficient distribution of energy resources while decreasing greenhouse gas emissions. Moreover, we actively propose optimal green solutions to customers, assisting them in planning, designing, and constructing green buildings to advance the industry's transition to net-zero emissions.
Green Engineering Project Management Process
01
Communication with customers regarding their demands
- Engage in thorough communication with customers to optimize business scale and resource utilization, while avoiding over-design.
- Provide professional "green value engineering solutions" tailored to customers' specific demands and budget. These solutions are presented to customers for evaluation and selection, creating new opportunities for the green economy.
02
Overall planning and design
- Plan the overall integration of energy-saving equipment, eco-friendly materials, and low-pollution design, while conducting performance analysis.
- Utilize Building Information Modeling (BIM) for precise calculations, increasing construction accuracy, reducing the risk of pipeline conflicts, and minimizing material waste.
- Effectively employ Virtual Reality (VR) technology to facilitate discussions with customers regarding site pipelines and space configuration. This allows for thorough communication and minimizes time and manpower waste.
BIM
- 2D,3D & VR
03
Green procurement
- Establish a standard system and procedures to effectively control resource inventory, adjust demand accordingly, and improve procurement performance.
- Strengthen green supply chain management by reviewing the specifications of green products and equipment, and systematizing all resources.
Intelligent Management
- ERP / PLM
04
Green engineering techniques
- Implement PLM (Product Lifecycle Management) project standardization management for efficient and instant communication.
- Integrate prefabricated components, modularized piping and wiring, automated monitoring equipment, and various other green engineering techniques to effectively enhance resource utilization efficiency and reduce costs.
ISO Management System
05
Environmental recovery/resource recycling
- Materials used on the project site should be shipped in batches to avoid excessive raw materials. Any materials that have been excessively ordered shall be repurchased by the suppliers or the information regarding the excess shall be entered into the procurement system for use by other units. These measures can effectively reduce and control leftover materials.
- Provide customers with a proper maintenance and repair strategy to decrease equipment wear and tear rates and equipment replacement rates.
3R Principles
An Overview of New Green Engineering Techniques
Scope of Techniques | approach | Implementation results |
---|---|---|
Air-conditioning and energy-saving | When an air duct airflow switch is necessary, such as in cleanrooms, freezers/refrigerators, or when reserving ductwork for Phase II, choose AMCA Leakage Class 1 or higher. | Minimizing leakage while enhancing the system's operational efficiency and reducing energy consumption. |
The air duct exhaust outlet is designed with a backdraft damper featuring excellent blade edges and airtightness. | Effectively reducing untreated makeup air from entering the room, thereby decreasing air-conditioning loads and preventing condensation. | |
The air duct system is designed with a airfoil blade backdraft damper | The airfoil blade, in the fully open position, has lower static pressure loss compare to a three-vane blade, reducing the power required for the fan shaft and lowering energy consumption. | |
The low-humidity air-conditioning chemical desiccant wheel features an energy-saving plate heat regenerator that recovers regenerative power in full. | Recycling the high-temperature exhaust of regenerative electric power to preheat the temperature of regenerated makeup air. This can reduce approximately 10% to 17% of regenerative electric power, thereby decreasing the power consumption/ carbon emissions. | |
Designing to incorporate cloud-based AI smart control for the main chilled water system. | Utilizing AI smart dynamic control strategy and analysis to identify the optimal operating point for the system, enabling a reduction in energy consumption by approximately 10% to 25%. | |
Designed to incorporate a central air-conditioning system with an 8°C temperature difference for chilled water and a 6°C temperature difference for cooling water. | Reducing system flow, duct size, and pump power requirements to minimize resource consumption and operating energy. | |
Small-sized air conditioning air cooler system, designed to incorporate a DC FCU direct-current variable frequency indoor air-conditioning forced draft fan. | Compared to the forced draft fan of an AC FCU, it reduces operating energy consumption by 30% to 40% during spring, autumn, winter, and nighttime. |
Scope of Techniques | approach | Implementation results |
---|---|---|
Air-conditioning environmental protection function | The makeup air unit (MAU) for high-salinity environment (e.g., near the sea) is designed with an anti-salt filter. | Extending the service life of equipment and mitigating indoor environmental corrosion from salt damage |
Designed with the AMCA Leakage Class 1 exhaust damper/ outlet. | Minimizing condensation and condensed water from indoor-outdoor temperature differences, and preventing untreated makeup air from entering indoor spaces, thereby reducing the workload on air-conditioning systems. |
Scope of Techniques | approach | Implementation results |
---|---|---|
Water and energy-saving in the manufacturing process | The food factories’ process pipelines incorporate the circular CIP (Clean-in-Place) & SIP (Sterilization-in-Place) systems | The circular CIP water usage, wastewater generation, and chemical usage require only 10% to 20% of a single-pass CIP system. |
Scope of Techniques | approach | Implementation results |
---|---|---|
Noise prevention | Install rubber shock absorber pads under the transformers within the residential area of the building. | how about: Preventing alternating magnetic flux caused by transformer core vibration from transmitting through the building to the interior, thereby enhancing personnel's comfort. |
The parking space is designed with EC induced flow jet fan. | It effectively reduces noise by 4dBA to 6dBA compared to a traditional induced flow jet fan. |
Scope of Techniques | approach | Implementation results |
---|---|---|
Air pollution control | When performing cutting operations that generate dust on the construction site (e.g., wood, calcium silicate board, gypsum board), utilize dust-collection and filtration equipment | This can effectively reduce air pollution |
Allocate dormitories or boarding houses for personnel involved in inter-regional projects and encourage those staying together to carpool. | This can reduce exhaust gas and GHG emissions. | |
The process exhaust system of the packaging material and label factory is designed with zeolite concentration rotor incineration instead of the wet scrubber treatment. | Compared to direct-fired incineration, it consumes less energy and achieves higher disposal efficiency due to the hydrophobic nature of the VOCs in the label's raw materials, which are not easily soluble in water. This can effectively reduce air pollution. |
Scope of Techniques | approach | Implementation results |
---|---|---|
Energy-saving through electrical engineering technology | Designed to use busways as the secondary side main power conductors to electrical rooms on each level. | Use the busway's lower electrical impedance characteristics to reduce voltage drop and power loss. |
Designed to incorporate the Power and Energy Management System (PEMS) | Monitor the distribution of energy consumption, prioritize management of energy-consuming equipment, optimize system load allocation, enhance power quality, and minimize reactive power loss. | |
Designed to incorporate automatic socket control | The socket power will be automatically cut off when the space is unused or after personnel leave for 30 minutes. This helps to reduce unnecessary energy consumption from equipment in standby/sleep mode (dedicated circuit for essential equipment). | |
Designed to incorporate renewable energy generation equipment with a capacity equal to 10% of the total capacity, such as solar panels and fans. | Reducing carbon emissions. | |
Designed to incorporate energy storage equipment/ systems using air compressor for daytime power supply. | Use energy storage equipment to store energy during off-peak hours at night, and discharge the energy during peak hours in the daytime to flatten load peaks and fill load valleys. This will help achieve electricity balance, while saving operating costs through differential electricity prices between peak and off-peak hours. |
Scope of Techniques | approach | Implementation results |
---|---|---|
Recovery system | Designed to integrate the recycling of RO/pure water process wastewater for replenishing water in the air-conditioning cooling tower. | Reducing the temperature of the cooling water and decreasing the volume of makeup water |
Scope of Techniques | approach | Implementation results |
---|---|---|
Green buildings | Designed to use the physical air-conditioning cooling water treatment system. | This helps to prevent secondary contamination by chemical agents and reduces the workload on the wastewater treatment system. |
Designed to integrate emergency fire broadcasting with business broadcasting | Effectively reduce the usage of pipes and wires. | |
In high-salinity environment (e.g., near the sea) and high-altitude areas, choose outdoor pipelines (e.g., air-conditioning cooling system) and valve components made of stainless steel or coated with anti-corrosive paint. | Enhancing anti-corrosive effectiveness and extending the service life of pipelines/valve components, which is 2.5 to 3.5 times longer than those made of galvanized materials. | |
Designed to use siphonic rainwater downpipe. | Decrease the quantity of main rainwater drainage pipes and reduce resource consumption. |
Scope of Techniques | approach | Implementation results |
---|---|---|
Environmental Protection | Designed to incorporate the parking space detection and indication system. | Indicating available parking spaces to prevent drivers from circling, thereby minimizing waste gas and greenhouse gas emissions. |
Designed to incorporate the use of anti-mildew and antibacterial emulsion paint when renovating/ repairing the ceiling/walls of the restrooms/ toilets/ garbage room. | Reduce the proliferation of mold/bacteria such as E. coli to maintain environmental quality. | |
Encourage the adoption of hybrid electric vehicles, electric vehicles, or vehicles with first-class energy efficiency for company cars used by managerial personnel. | Reduce waste gas and GHG emissions. |
Scope of Techniques | approach | Implementation results |
---|---|---|
Indoor air quality | Designed to incorporate a process exhaust system where the wind speed at the exhaust outlet is at least twice as high as the prevailing wind speed in surrounding areas, and the exhaust point is positioned at least 10% higher than the total height of the building. | This allows the exhaust flow to smoothly penetrate through the natural circulation layer around the building, preventing the recirculation of air from the wake region back into the makeup inlet and re-entering the building or HVAC system. |
Note: This table presents only green engineering techniques developed in the past two years. For green engineering techniques before 2021, please refer to the “Sustainable Innovation” chapter of Acter’s 2021 CSR report titled “An Overview of Green Engineering Technology and Applications”, available on the Company’s official website.
Overall Energy-Saving Benefits for Year 2023
11,283metric tonsCO2e
Note 1: Based on the electricity carbon emission factor of 0.495 kg CO2e /kWh announced by the Bureau of Energy in 2022 under the Ministry of Economic Affairs, converted to metric tons of CO2e.